Water detection systems


Control Panel Specifications
l	1,4 and 8 Zone configuration	l	Full cable monitoring
l	Internal and remote test facility	l	Repeater facility
l	Individual zone isolation to minimise "shut-down" for leak rectification	l	Main and zone relay outputs for interconnection with other systems
l	Audible and visual alarm	l	Key-switch sounder / output mute
l	240Vac (50Hz) mains operated	l	BT approved power supply unit
l	Battery back-up	l	Latch / Auto reset main output

The Control panel is also compatible with other types of sensors, e.g. Temperature, Humidity, Gas and can also monitor a power failure.

Standard detector pack

Absorbent Pad Detector

Multi-purpose detectors

Contains: 1 std detector, 1 cover plate vertical and floor mounting probes and fixing screws.

these can be Placed above suspended ceilings, disperse under raised floors, wrap around pipes and joints, place under sinks etc.

Remote Visual Indicators, can be used in conjunction will all detectors to sub zone for speed of leak location, or to indicate a hidden detector has activated, i.e. Above raised floors, Below false ceilings etc.

standard detectors or point water detector, applications: under floor, tanks, drains, sumps, doorways, thresholds, gullies or targeted at specific items. These detectors are easy to install and have stainless steel exposed parts, sealable against emersion

Multi-liquid Detector

The solution to all spillage problems, detecting leaks and overflows of most fluids and oils.

Applications

Oil spillage in boiler rooms, generators, storage, pipe work monitoring, tank level monitoring etc.

OPERATION: The multi-liquid Detector incorporates an opto Schmitt trigger which provides an output to denote the presence or absence of a liquid. The plastic detector dome embodies a LED and the opto Schmitt sensor is so arranged that when it is not covered by a liquid, a light path is established between them by total internal reflection. When a liquid is present, light refraction occurs through the liquid which operates the internal trigger resulting in the output relay being energised. This detector can be use with any proprietary brand of Fire or Security panel (as it is a stand alone unit).

	The new GCS Alarms Control Panel This is a high quality low cost panel which can be supplied as a single zone panel, or in two zone and four zone versions. All the functions are programmable from the on board keypad, all wiring is fully monitored there are provisions for independent zone isolation and outputs for remote monitoring. The GCS Panel is designed to accommodate rechargeable back up batteries in the event of a power fail.

This control panel will operate with most of the standard detectors already mentioned, and we can now supply a special water detection wire, this comes in 10 metre lengths with a plug and socket on each end. making it very easy to extend and cover the exact area needed. Ideal for laying under computer room floors around air conditioning units etc.